Lightweight Minimalist Pistol Brace (LMPB) by FFFTech/FFFTechnology

A three position adjustable, minimalist styled AR-15 pistol blade brace that attaches to
a Mil-Spec six position adjustable stock. Uses little material, (Compared to many other 3DP 
designs) and is rounded on all edges for forearm comfort.


This brace is designed for Milspec (6 Position) Carbine Buffer Tubes only. 


Printer Used: Monoprice Maker Select Plus

Filament Used: PLA+

Print Settings:

Extruder: 204C 
Bed: 54C 
First Layer Print Height: .22mm 
Standard Layer Height: .18mm
Wall Thickness: .40 
Wall Perimeters: 4
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100%


Hardware Needed:

1x M8x12 Hex Socketed Set Screw


Installation 

1) Press the hollow socket of the brace on the end of the carbine buffer tube.

2) Select one of three index points for the the brace's position. 

3) Once a position is chosen, thread the set screw through the brace, into the 
   index point.