Min-XL Pistol Brace: Laffs Dynamics

An extra long variant of the original Laffs Dynamics Min Pistol Brace, for people with larger forearms.

This brace is designed for Milspec (6 Position) Carbine Buffer Tubes only. 



Printer Used: Ender 3 V2

Filament Used: PLA+

Print Settings:

Extruder: 220C 
Bed: 56C 
First Layer Print Height: .2mm 
Standard Layer Height: .16mm
Wall Thickness: .40 
Wall Perimeters: 6+
Infill: 38%



Hardware Needed:

1x M8x12 Hex Socketed Set Screw