Razor Blade Brace V1.0.1: Laffs Dynamics

This brace is designed for Milspec (6 Position) Carbine Buffer Tubes only. 

Update V1.0.1: Added forgotten support material percentage print setting.


Printer Used: Ender 3 V2

Filament Used: PLA+

Print Settings:

Extruder: 220C 
Bed: 56C 
First Layer Print Height: .2mm 
Standard Layer Height: .16mm
Wall Thickness: .40 
Wall Perimeters: 5+
Infill: 32%
Support Material Percentage: 18%



Hardware Needed:

1x M8x12 Hex Socketed Set Screw