Balance Grips by FFFTech/FFFTechnology

A basic set of slim grips for the AR-15. (And other compatible firearms) The design was created to have a grip angle of 20°;
between A2's 25° and Magpul K2's 17° grip angles. In theory, this should allow for most people to have a comfortable 
grip, whether prone or offhand shooting. Two designs are available, a standard smooth grip, and a ridge textured grip.


Printer Used: Monoprice Maker Select Plus

Filament Used: PLA+

Print Settings:

Extruder: 204C 
Bed: 54C 
First Layer Print Height: .22mm 
Standard Layer Height: .18mm
Wall Thickness: .40 
Wall Perimeters: 4
Infill: 20% - 32%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 10% (Supports only needed for the bottom part of the grip that raises from the print bed)


Hardware Needed:

1x Allen Head Screw, 1/4-28 x 1"

1x Steel Star Washer

1x Safety Selector Detent

1x Safety Selector Detent Spring