CQ Grip by FFFTech/FFFTechnology

A grip copied from the Norinco Type CQ 311, an unlicensed Chinese copy of the American M16.

You could say this grip is a copy of a copy, that is also a copy... :D


Printer Used: Monoprice Maker Select Plus

Filament Used: PLA+

Print Settings:

Extruder: 204C 
Bed: 55C 
First Layer Print Height: .22mm 
Standard Layer Height: .16mm
Wall Thickness: .40 
Wall Perimeters: 4
Infill: 20% - 32%
Infill Pattern: Gyroid
Material Flow: 100%



Hardware Needed:

1x Allen Head Screw, 1/4-28 x 1"

1x Steel Star Washer

1x Safety Selector Detent Pin

1x Safety Selector Detent Spring