K Too AR-15 Grip: FFFTech/FFFTechnology

A grip that suspiciously looks like the Magpul K2... hmmmmmm. Nope that's all in your head!
Has a more vertical grip angle than the K2, ridged at the front to avoid grip slippage. 


Printer Used: Monoprice Maker Select Plus

Filament Used: PLA+

Print Settings:

Extruder: 215C 
Bed: 56C 
First Layer Print Height: .20mm 
Standard Layer Height: .14mm
Wall Thickness: .40 
Wall Perimeters: 4-5
Infill: 20%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 18% (Use tree supports; only needed for the top/rear of the grip.)


Hardware Needed:

1x Allen Head Screw, 1/4-28 x 1"

1x Steel Star Washer

1x Safety Selector Detent Pin

1x Safety Selector Detent Spring