CMW Mod Gripstop: FFFTech-Chairmanwon

A mod of the 3FTech Gripstop; enhanced via Chairmanwon's many fantastic stipple patterns. 



Printer Used: Monoprice Maker Select Plus

Filament Used: PLA+

Print Settings:

Extruder: 215C 
Bed: 56C 
First Layer Print Height: .20mm 
Standard Layer Height: .14mm
Wall Thickness: .40mm
Wall Perimeters: 4 -5
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 30%


Print the Gripstop upside-down.



Hardware Needed: 

2x M5x10 Hex Socketed Machine Screw/Bolt

2x M-Lok T-Nuts (Be sure both bolt & nut are the same thread pitch.)



Accreditation:

* Chairmanwon; Making a multiple modded stipple versions of this foregrip/handstop. This version is being released
separately from the original 3FTech Gripstop due to the many modded versions created, and I feel this deserves it's
own complete release. This is fantastic work he has done.