"Back to Basics" 1911 Grip Panels: FFFTech/FFFTechnology A basic, no frills set of grip panels for the M1911 pistol (and compatible variants) Filament Used: PLA+ Print Settings: Extruder: 218C Bed: 56C First Layer Print Height: .20mm Standard Layer Height: .16mm Wall Thickness: .40 Wall Perimeters: 4 - 6 Infill: 20% - 25% Infill Pattern: Gyroid Material Flow: 100% Support Material Percentage: 18% Hardware Needed: 4x 1911 Grip Panel Screws Accreditations: PrintYour2A / PY2A: Printed and assembled the grip panels onto their Springfield Armory 1911, as well as advised the print settings for others to manufacture with. Provided images of the panels by themselves, as well as on the firearm.