Cross Cut 1911 Grip Panels: FFFTech/FFFTechnology

A grip panel set for M1911 pistols (and compatible variants) with an interconnected cross pattern.

 
Filament Used: PLA+

Print Settings:

Extruder: 218C 
Bed: 56C 
First Layer Print Height: .20mm 
Standard Layer Height: .16mm
Wall Thickness: .40 
Wall Perimeters: 4 - 6
Infill: 20% - 25%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 18%


Hardware Needed:

4x 1911 Grip Panel Screws


Accreditations:

GW-DD: Printed and assembled the grip panels onto their 1911. Provided images of the panels by themselves, as well as on the firearm.