Kilroy Graffiti 1911 Grip Panels: FFFTech/FFFTechnology

A set of grip panels for the M1911 pistol (and compatible variants) with the "Kilroy Was Here" WWII 
graffiti imprinted.


Filament Used: PLA+

Print Settings:

Extruder: 218C 
Bed: 56C 
First Layer Print Height: .20mm 
Standard Layer Height: .12mm
Wall Thickness: .40 
Wall Perimeters: 4 - 6
Infill: 20% - 25%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 18%


Hardware Needed:

4x 1911 Grip Panel Screws


Accreditations:

PrintYour2A / PY2A: Printed and assembled the grip panels onto their Springfield Armory 
1911, as well as advised the print settings for others to manufacture with. Provided images 
of the panels on the firearm.