Target Point Ruger MKII Grip Panels: FFFTech/FFFTechnology

Grip panel set for Ruger MKII pistols, with concentric split half rings embossed into the panel surface.

Filament Used: PLA+

Print Settings:

Extruder: 218C 
Bed: 56C 
First Layer Print Height: .20mm 
Standard Layer Height: .12mm
Wall Thickness: .40 
Wall Perimeters: 4+
Infill: 20%+
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 18%


Hardware Needed:

4x Ruger MKII Grip Panel Screws