Chonk AKM Grip: FFFTech/FFFTechnology

This bad boi be the thiCCness, the honken chonken, a chubbers! 

OEM AKM grips are usually 21mm thick, but that hefty hunk is 24.2mm thiCC across the entire grip width!



Printer Used: Monoprice Maker Select Plus

Filament Used: PLA+

Print Settings:

Extruder: 215C 
Bed: 56C 
First Layer Print Height: .18mm 
Standard Layer Height: .14mm
Wall Thickness: .40 
Wall Perimeters: 4-5
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100%

Print the grip upside down



Hardware Needed:

1x OEM AK Grip Screw