SureHold AKM Grip: FFFTech/FFFTechnology

A design created from the ground up to ensure a secure hold on an AKM. 

Has ridges down the entire frontstrap, and ridging at the heel of the backstrap. The grip has a 
slight swell below the thumb - index finger section. At the bottom of the frontstrap the grip's
has an extended toe to aid in retention. 



Printer Used: Monoprice Maker Select Plus

Filament Used: PLA+

Print Settings:

Extruder: 215C 
Bed: 56C 
First Layer Print Height: .18mm 
Standard Layer Height: .14mm
Wall Thickness: .40 
Wall Perimeters: 4-5
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100%

Print the grip upside down



Hardware Needed:

1x OEM AK Grip Screw