96-15 AR-15 Grip: FFFTech/FFFTechnology & V8vtwin

A design that mimics the look and feel of the C96 pistol's grip. 

Printer Used: Monoprice Maker Select Plus

Filament Used: PLA+

Print Settings:

Extruder: 210C 
Bed: 55C 
First Layer Print Height: .20mm 
Standard Layer Height: .14mm
Wall Thickness: .40 
Wall Perimeters: 5 - 6
Infill: 50%
Infill Pattern: Gyroid
Material Flow: 100%

Print the grip upside down



Hardware Needed:

1x Allen Head Screw, 1/4-28 x 1"

1x Steel Star Washer

1x Safety Selector Detent Pin

1x Safety Selector Detent Spring

2x M5x15 Screws



Accreditations:

V8vtwin: Providing the base design model for me to build off of. The grip panels were the hard part for me, 
to which when provided I didn't have to modify them in the slightest. 

Jak321: For building and testing the design, as well as printing the grip panels in wood PLA and applying wood finish.