AGH MY SKELETONIZED NECK Mini Grip (AR-15): Laffs Dynamics I warned ya in the original release I'd finish the job! Snapped my neck and now I'm a spooky bone rattle boi! Skeletonized variant of the original AGH MY NECK Mini Grip. Front to Back Length: ~50mm (Excluding top grip mounting section.) Side to Side Width: Swells from 22.32mm out to 30.70mm Top to Bottom Height: 92.94mm Printer Used: Ender 3 V2 Filament Used: PLA+ Print Settings: Extruder: 220C Bed: 56C First Layer Print Height: .20mm Standard Layer Height: .14mm - .16mm Wall Thickness: .40 Wall Perimeters: 5+ Infill: 25%+ Support Material Percentage: 18% Hardware Needed: 1x Allen Head Screw, 1/4-28 x 1" 1x Steel Star Washer 1x Safety Selector Detent Pin 1x Safety Selector Detent Spring