PM-DTA Grips (AR-15): FFFTech/FFFTechnology

This grip got a BIG BUTT, a thiCC Thumper, a HUUUUUUUUGE ASS! Good GAWD!

This is the Pixar Mom Dump Truck Ass Grip!

Has a swept backstrap, with a concave frontal section. But(t) those aren't the *biggest* features. The grip starts from 
the top at 22.3mm wide, and swells near its fat a- heel... to 29.3mm! *Oh lawdy...*

Comes in two variants: 

 *Standard
 *Ridged



Printer Used: Ender 3 V2

Filament Used: PLA+

Print Settings:

Extruder: 220C 
Bed: 56C 
First Layer Print Height: .20mm 
Standard Layer Height: .16mm
Wall Thickness: .40 
Wall Perimeters: 5+
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100.25%
Support Material Percentage: 18% 



Hardware Needed:

1x Allen Head Screw, 1/4-28 x 1"

1x Steel Star Washer

1x Safety Selector Detent Pin

1x Safety Selector Detent Spring