Strike 90 Grip (AR-15): FFFTech/FFFTechnology

A 0°/90° angled grip designed for CQC. Swells from 22.3mm at the top section, and out to 26mm at the bottom. 
Has side palm scallops across the bottom-sides of the grip. 

Printer Used: Ender 3 V2

Filament Used: PLA+

Print Settings:

Extruder: 220C 
Bed: 56C 
First Layer Print Height: .20mm 
Standard Layer Height: .16mm
Wall Thickness: .40 
Wall Perimeters: 5+
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 18% 

Hardware Needed:

1x Allen Head Screw, 1/4-28 x 1"

1x Steel Star Washer

1x Safety Selector Detent Pin

1x Safety Selector Detent Spring