3FTech Cutback AKM Grip: FFFTech/FFFTechnology

The first of many 3FTech AKM grip designs. 

Has an elongated beavertail for thumb webbing support, ridges down the front to 
help avoid slippage. The bottom of the grip has less material for faster printing 
of the design, and slightly reduces it's weight.


Printer Used: Monoprice Maker Select Plus

Filament Used: PLA+

Print Settings:

Extruder: 215C 
Bed: 56C 
First Layer Print Height: .20mm 
Standard Layer Height: .16mm
Wall Thickness: .40 
Wall Perimeters: 4-5
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100%

Print the grip upside down


Hardware Needed:

1x OEM AK Grip Screw