Basic Ruger MKII Grip Panels: FFFTech/FFFTechnology & Lucy_b A basic grip panel set for Ruger MKII pistols. Filament Used: PLA+ Print Settings: Extruder: 218C Bed: 56C First Layer Print Height: .20mm Standard Layer Height: .12mm - .14mm Wall Thickness: .40 Wall Perimeters: 4 - 6 Infill: 20% - 25% Infill Pattern: Gyroid Material Flow: 100% Support Material Percentage: 18% Hardware Needed: 4x Ruger MKII Grip Panel Screws Accreditations: Lucy_b: Printed and assembled the grip panels onto their AMT Lightning. (Clone of Ruger MKII) Provided opinion for aesthetics, printed multiple iterative versions of the panels and provided info for correct fitment of the design.