Forward Micro Picatinny AFG V1.1: FFFTech/FFFTechnology A variant of the 3FTech Forward Micro AFG, adapted for mounting on picatinny rails. Designed for PDWs/SMGs/Pistols. This AFG is angled 70° forwards, legally allowing it to be used on pistols. (Ya fuck'n feds...) Comes in two varieties: *Standard *Ridged Update V1.1: Enlarged picatinny rail channel for better fitment. Printer Used: Monoprice Maker Select Plus Filament Used: PLA+ Print Settings: Extruder: 218C Bed: 56C First Layer Print Height: .20mm Standard Layer Height: .14mm Wall Thickness: .40mm Wall Perimeters: 4 - 5 Infill: 25% Infill Pattern: Gyroid Material Flow: 100% Support Material Percentage: 20% Print the AFG upside down. Hardware Needed: 1x M5x30 Hex Socketed Machine Screw/Bolt 1x M5 Hex Nut (Be sure both bolt & nut are the same thread pitch.)