"Revolt" Push Dagger: FFFTech/FFFTechnology

A 3DP compact push dagger with a widened spear point to resist tip breakage. The tip is thicker 
than the previous FFFTechnology released push dagger.  

Features a wide blade, with a ridged grip.

Printer Used: Monoprice Maker Select Plus

Filament Used: PLA+

Print Settings:

Extruder: 218C 
Bed: 56C 
First Layer Print Height: .18mm 
Standard Layer Height: .12mm - .14mm
Wall Thickness: .40 
Wall Perimeters: 5
Infill: 50%
Infill Pattern: Gyroid
Material Flow: 100%