"Tyrannicide" Push Daggers: FFFTech/FFFTechnology

An offset T-handle push dagger with an angular, barbed blade.  

Comes in two variants: 

 *Standard
 *XL

Printer Used: Ender 3 V2

Filament Used: PLA+

Print Settings:

Extruder: 216C 
Bed: 56C 
First Layer Print Height: .18mm 
Standard Layer Height: .12mm
Wall Thickness: .40 
Wall Perimeters: 7
Infill: 50%
Infill Pattern: Gyroid
Material Flow: 100%



Their rule always comes to an end, one way or another...