Waco Waffle Raider AK Magazine: Laffs Dynamics

A 30rd variant of the original Waco Waffle Tanker.

Features a reinforced "waffle" style ribbed magazine body, HEAVILY inspired by Arsenal (Bulgarian) Circle 10 "Waffle" mags.
Has a thickened baseplate to absorb impacts from drops, an anti-friction follower, and a separately printed rear locking 
lug.

This design ALSO allows the use of AR-15 magazine springs via alternate follower and floorplate versions, for Western 
(North American countries) builders; as AR-15 magazine springs are often cheaper and easier to acquire. 


Tested with:

 * Palmetto State Armory PSAK-47 GF3, Domestic
 * Zastava ZPAP M70, Serbian Import


Two follower and floorplate versions are available: 

 *Standard: AK spring usage.
 *AR: AR-15 spring usage, labeled on each part. 

Shares identical parts with the original Laffs Dynamics Waco Waffle Tanker AKM Mag; with the exception of using a 30rd 
magazine spring. 



Printer Used: Ender 3 V2

Filament Used: PLA+

Print Settings:

Extruder: 220C
Bed: 56C 
First Layer Print Height: .2mm 
Standard Layer Height: .16mm
Wall Perimeters: 7+ 
Infill: 45%+
Infill Pattern: Gyroid
Support Material Percentage: 18%



Hardware Needed:

1x 30rd Length AK Mag Spring

1x 30rd Length AR-15 Mag Spring (OPTIONAL)



Parts Installation:

1) Apply cyanoacrylate adhesive inside the pocket for the rear locking lug. If the rear locking lug is slightly loose 
in the pocket, apply Clear Gorilla Glue. Wait 24hrs for the adhesive to cure. 

2) Insert the rear locking lug, with the angled facet facing outwards, and down towards the mag body's base. 

3) Lightly sand the anti-friction follower's sides and curved spine. 

4) Slide the top of the magazine spring through the front of the follower, above the spring retention tab.

5) Attach the floorplate to the bottom of the magazine spring, making sure the first spring winding snaps over the 
retainers. 

6) Slide the internal spring assembly into the magazine body.

7) Depress the floorplate, and slide on the baseplate. The floorplate's locking tab must index with the channel in the 
baseplate. 



Notes: 

1) Bulgarian, Korean, and US based Magpul springs have been tested.

2) Bulgarian Slabside Polymer AK mag followers are compatible with the Waco Waffle series of magazines. 



Accreditations:

Dianexis: Getting these mag designs out to sum based southern boyos. 

Special Thanks To: Dianexis, GW-DD, ProSpaceDog, Freeman1337, and for the moral support of this project.