+2 Dmg Glock Mag Extension V1.25 by FFFTech/FFFTechnology

Oh lookie here boyos, ye found a weapon mod that adds +2 dmg spec to yer lead launcher. 
No doubt this'll help when we raid the Level 9 Dungeon full'a Orcs...

Oh wait, this aint a role playing game... 

This is a +2 mag extension for Glock double stack 9x19 NATO caliber mags. The design 
features ridging that wraps around the front and sides of the extension to aid in 
mag retention within one's grasp when unloading/reloading the pistol. The sides of 
extension are thickened for greater durability if/when the mag is dropped onto a 
hard surface. 

Compatible with Gen 3-4 Glock magazines. 

V1.25 Update: Depth increased by 3mm to allow for less compression on the magazine spring; 
which in turn puts less stress on the retention tabs. 


Printer Used: Monoprice Maker Select Plus

Filament Used: PLA+

Print Settings:

Extruder: 204C 
Bed: 54C 
First Layer Print Height: .20mm 
Standard Layer Height: .14mm
Wall Thickness: .40 
Wall Perimeters: 6
Infill: 36%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 25%
Support X/Y Offset: .34mm


Hardware Needed: 

1x Compatible OEM Mag Body (Such as: Gen 3 G17 mag, or a Gen 4 G19 mag)

1x Standard Length Mag Spring

1x Standard OEM Floorplate (For compressing the mag spring when assembling/disassembling)