Gen 3 PMag PAP: FFFTech/FFFTechnology

A 3d printed Pull Assist Plate for Gen 3 PMags.


Printer Used: Ender 3 V2

Filament Used: PLA+

Print Settings:

Extruder: 220C 
Bed: 56C 
First Layer Print Height: .20mm 
Standard Layer Height: .16mm
Wall Thickness: .40 
Wall Perimeters: 6+
Infill: 32%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 16%
Support X/Y Offset: .5mm