AR - Evo Grip Adaptor: FFFTech/FFFTechnology & Insertmeow

An adaptor designed for mounting standard AR-15 grips to the CZ Scorpion Evo 3 and AWCY? Sczorpion.

Printer Used: Monoprice Maker Select Plus

Filament Used: PLA+

Print Settings:

Extruder: 218C 
Bed: 54C 
First Layer Print Height: .18mm 
Standard Layer Height: .14mm
Wall Thickness: .40 
Wall Perimeters: 4 - 5
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 20%

Print the adaptor upside-down.



Hardware Required:

1x M4x30mm Bolt

1x M4 Hex Nut

1x Allen Head Screw, 1/4-28 x 1"

1x Steel Star Washer



Accreditation: 

* Justinhates: For test fitting the grip adaptor, and providing images. Origin of design request.  

* Insertmeow: Original designer of the CZ Sczorpion MOE Grips, which this design uses the top portion of his grip model. Also 
he had been working unbeknownst to me, on the same project in 2020;  though it's slightly different in geometry.