Lancer L5AWM Replacement Magazine Baseplate: FFFTech/FFFTechnology

A replacement 3D printed baseplate for Lancer L5AWM magazines. Come on, don't lie; I know 
you've lost basic crap like that before...



Printer Used: Monoprice Maker Select Plus

Filament Used: PLA+

Print Settings:

Extruder: 204C 
Bed: 54C 
First Layer Print Height: .20mm 
Standard Layer Height: .14mm
Wall Thickness: .40 
Wall Perimeters: 5
Infill: 36%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 25%
Support X/Y Offset: .34mm