M70 Picatinny Buttstock Adaptor: FFFTech/FFFTechnology

A 4 slot picatinny adaptor for Zastava (AKA Yugo) M70 AK variants. 



Printer Used: Ender 3 V2

Filament Used: PLA+

Print Settings:

Extruder: 218C 
Bed: 56C 
First Layer Print Height: .20mm 
Standard Layer Height: .16mm
Wall Thickness: .40 
Wall Perimeters: 5+
Infill: 25%+
Material Flow: 100%
Support Material Percentage: 16%



Hardware Needed:

1x M8x30 Bolt, 1mm fine thread pitch (NOT 1.25mm)

1x M8 Washer, 15mm OD (Optional)

2x M4x12mm (Or M4x15mm) Bolts

2x M4 Nuts