Throw lever for Primary Arms 1-6x SFP scopes. This is an original design.   

**TABLE OF CONTENTS**
- Parts
- Printing Details
 
**PARTS**
- (1) M3x12mm socket head screw
- (1) M3 nut
	

**PRINTING DETAILS**
- Settings (Tested on ender 3V2 with 0.6mm tungsten carbide nozzle):
	- Material: Overature Easy Nylon
		- 255C hotend, 60C bed, fan off
	- Material: 3DXTECH EZ-PC Carbon Fiber
		- 260C hotend, 100C bed, fan off
	- layer height: 0.2mm 
	- perimeters: 3 perimeters with 100% infill 
	- speed: 25mm/s outer walls, 25mm/s inner walls. 
	- no brim, no raft
	- no supports
- The STL's are oriented correctly for printing. 
- Calibrate flow using the 2-wall method shown at https://3dprintbeginner.com/flow-rate-calibration/

I hope you enjoy my work. 
https://odysee.com/@Tavelkyosoba:b