3FTech M-Lok Slot Covers: FFFTech/FFFTechnology

I really don't know why people like these, it's not like the M-Lok slots get in the way of anything. 

Oh well. They're covers. They attach via two M5 screws and t nuts. 

Four variants are available:

* Single Slot Cover

* 1.5 Slot Cover

* 2 Slot Cover

* 3 Slot Cover



Printer Used: Monoprice Maker Select Plus

Filament Used: PLA+

Print Settings:

Extruder: 210C 
Bed: 56C 
First Layer Print Height: .20mm 
Standard Layer Height: .14mm
Wall Thickness: .40mm
Wall Perimeters: 4 -5
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 30%



Hardware Needed: 

2x M5x10 Hex Socketed Machine Screw/Bolt

2x M-Lok T-Nuts (Be sure both bolt & nut are the same thread pitch.)