DYNAMIC DONG M-Lok Flat Mount AFGs: Laffs Dynamics

Variants of the original Dynamic Dong M-Lok AFGs, designed for mounting on flat faced / non rounded handguards. 

Comes in two variants, both with two sub variants: 

* Dong Dangler
    - Ribbed Dangler

* Lil Silly
    - Ribbed Silly

You can figure out which one's are longer :D 



Printer Used: Ender 3 V2

Filament Used: PLA+

Print Settings:

Extruder: 220C 
Bed: 56C 
First Layer Print Height: .2mm 
Standard Layer Height: .14mm+
Wall Thickness: .40 
Wall Perimeters: 5+
Infill: 28%+
Support Material Percentage: 18%

Print the dong upside down. 



Hardware Required:

2x M5x10 Hex Socketed Machine Screw/Bolt

2x M-Lok T-Nuts (Be sure both bolt & nut are the same thread pitch.)



Developer's Notes:

*During the original development of the Dynamic Dong, the model variants were actually called the Hung 'n Slung, and the Chode; instead 
of their released "family friendly" designations. 

*I was giggled at when I originally asked around for ppl's AK dong dims, so I had Chairmanwon do it for me. Not surprisingly, ppl 
straight up gave him the data needed.