Laffs Picatinny Handstop V1.1.2: Laffs Dynamics

...It's a handstop that mounts to picatinny rails...

Were you expecting some deep lore? 


Update V1.1.2: Redesignated the design. Relabeled designer name. Loosened picatinny channel dimensions. 



Printer Used: Ender 3 V2

Filament Used: PLA+

Print Settings:

Extruder: 220C 
Bed: 56C 
First Layer Print Height: .20mm 
Standard Layer Height: .12mm
Wall Thickness: .40mm
Wall Perimeters: 4+
Infill: 20%+
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 18%

Print the handstop upside-down.



Hardware Required:

1x M4x30mm Bolt (Can be ground down to 28mm so it doesn't stick out the side)

1x M4 Hex Nut