3FTech M-Lok Full Length Handstop by FFFTech/FFFTechnology

A set of full length M-Lok rail mounted handstops.

Two separate models have been created:

 *Basic
 *Longboi (12mm longer than previous Basic)

(Longboi model pictured in the Images folder)

Printer Used: Monoprice Maker Select Plus

Filament Used: PLA+

Print Settings:

Extruder: 204C 
Bed: 56C 
First Layer Print Height: .18mm 
Standard Layer Height: .14mm
Wall Thickness: .40mm
Wall Perimeters: 4
Infill: 30%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 25%


Print the handstop upside-down


Hardware Needed: 

2x M5x12 Hex Screw

2x M-Lok T-Nut