3FTech M-Lok Mini Handstop by FFFTech/FFFTechnology

A small, basic, mini handstop for M-Lok railed forends.

Two separate models have been created:

 *Standard
 *Laffs

Printer Used: Monoprice Maker Select Plus

Filament Used: PLA+

Print Settings:

Extruder: 204C 
Bed: 56C 
First Layer Print Height: .18mm 
Standard Layer Height: .12mm
Wall Thickness: .40mm
Wall Perimeters: 5
Infill: 32%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 25%


Print the handstop upside-down


Hardware Needed: 

1x M5x12 Hex Screw

1x M-Lok T-Nut