Picatinny AR Grip Mount: Laffs Dynamics

A picatinny mount, adapts AR-15 grips for the use as dedicated angled or vertical foregrips. 

Any AR-15 grip with an angle of less or more than 90° is considered an angled foregrip if used in conjunction with 
the Picatinny AR Grip Mount. An AR-15 grip with an angle of EXACTLY 90° will be considered a vertical foregrip if 
used with the Picatinny AR Grip Mount. 


Printer Used: Ender 3 V2

Filament Used: PLA+

Print Settings:

Extruder: 220C 
Bed: 56C 
First Layer Print Height: .20mm 
Standard Layer Height: .16mm
Wall Thickness: .40 
Wall Perimeters: 5+
Infill: 32%
Infill Pattern: Gyroid
Support Material Percentage: 18% 



Hardware Needed:

1x Allen Head Screw, 1/4-28 x 1"

1x Steel Star Washer

1x M4x30mm Bolt (Can be ground down to 28mm so it doesn't stick out the side)

1x M4 Hex Nut