VFG 001: Laffs Dynamics

A medium length vertical foregrip with an oblong cross section. 

Comes in three variants: 

 *Standard
 *Ridged
 *Perforated



Printer Used: Ender 3 V2

Filament Used: PLA+

Print Settings:

Extruder: 220C 
Bed: 56C 
First Layer Print Height: .2mm 
Standard Layer Height: .14mm - .16mm
Wall Thickness: .40 
Wall Perimeters: 5+
Infill: 25%+
Infill Pattern: Gyroid
Support Material Percentage: 18%

Print the VFG upside-down. 



Hardware Required:

1x M4x30mm Bolt (Can be ground down to 28mm, so it doesn't stick out the side)

1x M4 Hex Nut