M-Lok - Picatinny Adaptor Rail (5 Slot) by FFFTech/FFFTechnology

A 5 slot picatinny rail that attaches to M-Lok rails. To be used if one wishes
to use an accessory such as a light mount or foregrip that is only picatinny 
mount compatible. 


Printer Used: Monoprice Maker Select Plus

Filament Used: PLA+

Print Settings:

Extruder: 204C 
Bed: 56C 
First Layer Print Height: .18mm 
Standard Layer Height: .14mm
Wall Thickness: .40mm
Wall Perimeters: 6
Infill: 40%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 26%

Scale the model +/- .01%, depending on your printers manufacturing parameters and
depending on the plastic shrink percentage. (PLA shrinks about 5%)

Because the rail will need to withstand heavy leverage forces (Like using a foregrip 
and the like.) It's HIGHLY advised you use the settings stated above.


Hardware Needed: 

2x M5x10 Hex Screw

2x M-Lok T-Nuts