M-Lok - Picatinny Cantilever Rail by FFFTech/FFFTechnology

A 4 slot picatinny cantilever rail that attaches to M-Lok rails. Used for 
attaching a weapon light or laser further down the handguard than a standard 
rail's mounting position permits. 


Printer Used: Monoprice Maker Select Plus

Filament Used: PLA+

Print Settings:

Extruder: 204C 
Bed: 56C 
First Layer Print Height: .18mm 
Standard Layer Height: .14mm
Wall Thickness: .40mm
Wall Perimeters: 8
Infill: 50%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 26%

Scale the model +/- .01%, depending on your printers manufacturing parameters and
depending on the plastic shrink percentage. (PLA shrinks about 5%)


Hardware Needed: 

2x M5x10 Hex Screw

2x M-Lok T-Nuts