"Mountain Scout" Compact Fixed Carbine Buttstock: Laffs Dynamics

A compact version of the Laffs Dynamics original Mountain Scout Compact Fixed Carbine Buttstock. Reduced in overall length by 
24mm. (Roughly 1in.) 

Has a single 34mm long, vertical sling loop.

Comes with two buttpads: 

 * Standard, 8mm thick
 * Extended, 18mm thick


This buttstock is designed for Milspec Carbine Buffer Tubes only. 



Printer Used: Ender 3 V2

Filament Used: PLA+

Print Settings:

Extruder: 220C 
Bed: 56C 
First Layer Print Height: .2mm 
Standard Layer Height: .2mm
Wall Perimeters: 5+
Infill: 25%+
Material Flow: 100%

NO support material is needed. 



Hardware Needed:

1x M8x10 Hex Socketed Set Screw

2x M4x12 Screws