380 ACP / 9mm Kurz Snap Caps V1.0.1: FFFTech/FFFTechnology

3D printed snap caps, dimensions of a 380 ACP / 9mm Kurz cartridge. 

Two variants are available:

 *FMJ
 *Hollowpoint



Update: Fixed the advised scaling setting; originally stated to scale +/- .1%, but the intended scaling was meant to 
be +/- .01%



Printer Used: Monoprice Maker Select Plus

Filament Used: PLA+

Print Settings:

Extruder: 218C 
Bed: 56C 
First Layer Print Height: .18mm 
Standard Layer Height: .1mm - .14mm
Wall Thickness: .40 
Wall Perimeters: 7+
Infill: 30%+
Infill Pattern: Gyroid
Material Flow: 100%

(Highly advisable to print 3+ copies on a single build plate)

Depending on your machine's settings, you might need to scale +/- .01% for best fit of snap caps into the chamber.



Accreditation:

Eyeliketurtles: Many thanks for printing and testing the design; as well as providing video footage and photographs. 
Tested in their Bersa Thunder 380, and their KelTec P3AT. Tested both Hollowpoints and FMJ variants.