7.62x39 Snap Cap: FFFTech/FFFTechnology

3D printed snap cap, dimensions of a 7.62x39 cartridge.



Printer Used: Ender 3 V2

Filament Used: PLA+

Print Settings:

Extruder: 218C 
Bed: 56C 
First Layer Print Height: .18mm 
Standard Layer Height: .1mm - .12mm
Wall Thickness: .40 
Wall Perimeters: 5+
Infill: 32%+
Infill Pattern: Gyroid
Material Flow: 100%

(Highly advisable to print 3+ copies on a single build plate)

Depending on your machine's settings, you might need to scale +/- .01% for best fit of snap caps into the chamber.