Art by a Trans Woman for everyone to enjoy!
I accept No Responsibility or Liability for how, or by who, this Art is used.
No Guarantees or Assurances or Assertions are made concerning any of this Art.
This is for Reference Only.
DO NOT ATTEMPT TO MAKE ANY OF THIS ART!!!
----------------

If you remix or change anything, feel free to add your name and info here:
----------------

Release date:
----------------
02May2022 - Pre Alpha
04May2022 - Pre Alpha - added STL & STEP for the 34SCA-1-A Ammo "Corn", exported missing Breach Plate - Template.stl, started fleshing out readme
17May2022 - Alpha - Converted from WS to SD category
22May2022 - Beta - Moved 34SCA-2-B and (The Armourer) ammo files into the STL Folder
24May2022 - Beta - Made a rear sight, changed the SD-34SCA-2-B to -C and made it solid
27Sep2022 - Beta Ended Sucesfully
05Oct2022 - Release

BCAM-SD-34SC-1-A
----------------
Black Cat Aircraft & Manufacturing
-
Signaling Device
-
34mm Shoulder Cannon
-
model 1
-
version A

Print settings:
----------------
0.2mm layers
15 walls/tops/bottoms minimum
15% infill as support
Support touching the bed

Printing Remarks:
----------------
Print as it spawns/fits on your machine.

Assembly Remarks:
----------------
When JB Welding the Metal parts need to be sanded to bare metal or they will slip during firing.
When useing the Case DIY Primer - 50mm, follow the instructions for building that up from the 12FPR.


Tools:
----------------
Printer
Grinder with Cut Off Disk or Metal Saw
File
Drill and Bits
Tap M5
Tap 3/8 or M10 for the All Thread
Knife
Driver and Wrenches for the Hardware
Pen
Clamp or Vice helps

Materials:
----------------
5mm or 3/16 thick x 2" wide Steel Flat Bar for the Breach Plate : https://www.homedepot.com/p/Everbilt-2-in-x-36-in-Plain-Steel-Flat-Bar-with-3-16-in-Thick-801867/204225719
1-1/4" Black Iron Pipe 600mm or longer : https://www.lowes.com/pd/B-K-SteelTek-1-1-4-in-x-36-in-Galvanized-Steel-Structural-Pipe/1000057737
2ea 1Kg spools of PLA
14ea m5x20 socket drive grip head bolts : https://www.amazon.com/dp/B07ZNWTPL6?ref_=cm_sw_r_cp_ud_dp_D7VDKCV4GGR918W4XSS9
JB Weld
CA Glue "Super Glue"
3/8" or 10mm All Thread, at least 650mm
9ea 10mm thick Nuts for the All Thread
Masking Tape
Assorted Springs : https://www.amazon.com/dp/B00VDRF25C?ref_=cm_sw_r_cp_ud_dp_WVGX8PZ1DMSYM74WRM9J
Finishing nail 2" long or 3mm rod for firing pin
12ga low brass target loads or low brass primed hulls and fiber wadding
FF or equivalent Black Powder
410 Chamber Adapter uses a SCH40 3/8" Black Iron Pipe
12Ga Chamber Adapter uses a SCH40 3/4" Black Iron Pipe

Side Note:
----------------

Contributes:
----------------
The Armourer: Ammunition R&D Lead Dev
Gasp:Tester, Fist tester to Start Printing
Chronic Herb: Tester, First to Test
LKFIII: Tester