Art by a Trans Woman for everyone to enjoy!
I accept No Responsibility or Liability for how, or by who, this Art is used.
No Guarantees or Assurances or Assertions are made concerning any of this Art.
This is for Reference Only.
DO NOT ATTEMPT TO MAKE ANY OF THIS ART!!!
----------------

If you remix or change anything, feel free to add your name and info here:
----------------


Release date:
----------------
21Apr2022 - Pre Beta
29May2022 - Beta
30May2022 - Beta - Update readme
03Feb2023 - Beta Complete
13Feb2023 - Release

BCAM-WS-12NSS-2-D
----------------
Black Cat Aircraft & Manufacturing
-
Weapon Systems
-
12ga Need Some Sleep
-
model 2
-
version D

Print settings:
----------------
0.2 layer height
15 walls
15 top/bottoms
support as infill
15% infill
brim

Printing Remarks:
----------------
print as it spawns

Assembly Remarks:
----------------


Tools:
----------------
Printer
Grinder with Cut Off Disk or Metal Saw
File
Drill and Bits
Tap M5
Tap 3/8 or M10 for the All Thread
Knife
Driver and Wrenches for the Hardware
Pen
Clamp or Vice helps

Materials:
----------------
5mm or 3/16 thick x 2" wide Steel Flat Bar for the Breach Plate, Locking Plate, Locking Lug : https://www.homedepot.com/p/Everbilt-2-in-x-36-in-Plain-Steel-Flat-Bar-with-3-16-in-Thick-801867/204225719
3/4" Black Iron Pipe 19" or longer
2ea 1Kg spools of PLA
15ea m5x20 socket drive grip head bolts : https://www.amazon.com/dp/B07ZNWTPL6?ref_=cm_sw_r_cp_ud_dp_D7VDKCV4GGR918W4XSS9
JB Weld
CA Glue "Super Glue"
3/8" or 10mm All Thread
10mm thick Nuts for the All Thread
Assorted Springs : https://www.amazon.com/dp/B00VDRF25C?ref_=cm_sw_r_cp_ud_dp_WVGX8PZ1DMSYM74WRM9J
Finishing nail 2" long or 3mm rod for firing pin
12ga low brass target loads

Side Note:
----------------

Contributes:
----------------
LKFIII - First to test
Chronic Herb - Tester
Here2printeverything-72" barrel 12ga build (Narwhal)