If you remix or change anything, feel free to add your name and info here: ---------------- Release date: ---------------- 29Aug2021 BCAM-WS-22EZ-1-A-Upgrade Kit ---------------- Black Cat Aircraft & Manufacturing - Weapon Systems - 22 EZ - model 1 - version A Print settings: ---------------- 0.2 layer height 15 walls 15 top/bottoms support as infill 15% infill Printing Remarks: ---------------- Print the Brake 1 on its nose with no support. Print the Trigger Thin on its side with no support. Print the Slide Sear on its front or back with no support. Assembly Remarks: ---------------- It is advisable to JB Weld the Brake 1 onto the barrel and the Slide Sear on to the slug. Use washers on one or both sides of the Trigger Thin to make it the proper thickness to match the Frame Center.