Art by a Trans Woman for everyone to enjoy!
I accept No Responsibility or Liability for how, or by who, this Art is used.
No Guarantees or Assurances or Assertions are made concerning any of this Art.
This is for Reference Only.
DO NOT ATTEMPT TO MAKE ANY OF THIS ART!!!
----------------

If you remix or change anything, feel free to add your name and info here:
----------------


Release date:
----------------
06JAN2022 - Pre Alpha
08JAN2022 - Pre Alpha - Fixed Mag Catch
08JAN2022 - Pre Alpha - Barrel Guard option for all the Barrel Blocks
08JAN2022 - Pre Alpha - Barrel Guard option for all the Barrel Blocks fixed to 5mm thick
09JAN2022 - Pre Alpha - (-B) Clam Shell Frame
11FEB2022 - Pre Alpha - (-C) New simpler Slide
23FEB2022 - Pre Alpha - (-D) New cleaner Slide, New MHG, Long Mag Catch
08MAR2022 - Pre Alpha - (-F) Brought back the Slide Pusher Plate, the Breach Plate is made from 3ea, 5mm thick totaling 15mm
02APR2022 - Beta
13APR2022 - Release

BCAM-WS-9NSS-1-F
----------------
Black Cat Aircraft & Manufacturing
-
Weapon Systems
-
9mm Need Some Sleep
-
model 1
-
version F

Print settings:
----------------
0.2mm layers
15 walls/tops/bottoms minimum
15% infill as support
Support touching the bed

Printing Remarks:
----------------
Print as it spawns/fits on your machine
DO NOT UNDER PRINT. This WILL lead to a dangerous Failure during firing.

Assembly Remarks:
----------------
Make 3ea of the 5mm thick Breach Plates and tap their outer holes for the All Thread, then insert the All thread with 1 to 2 threads exposed in front of the Breach Plate, then insert into Slide Front and use a nut to sandwich this assembly tightly, then add the Slide Pusher Plate and another nut to sandwich this onto the back of the previous assembly. then assemble the slide as normal.

Firing Pin is retained by a shortened M5 Bolt.

This uses a FCG from an AR15. It is recommended to add M4 Brass Heat Inserts to support the Trigger and Hammer and to use M4x30 Bolts.

Use a M5x25-30 Bolt on the Mag Catch Button to retain it and transfer pressure to the Mag Catch.

Use 5mm (3/16") thick 50-51mm (2") wide Steel Flat Bar to make the: Rails, Spring Plate, Slide Pusher Plate and Breach Plate. On the Breach Plate, Drill and Tap the outer two holes to match the All Thread that you are using in the slide (3/8 or 10mm allthread).

Tools:
----------------
3D Printer
M4 Tap
M5 Tap
M10 (3/8") Tap
Knife
Allen Wrenches
Drill (Bits)
Pliers
Grinder (Cut off and Sanding/Grinding)
Files (Assorted)
Soldering Iron and or other heat source for Brass Inserts
Pen
Clamp and or Vice

Materials:
----------------
1-2Kg PLA
26ea (Min) M5x25 Bolts
2ea (Min) M4x30 Bolts
4ea M5 Brass Heat Inserts
4ea M4 Brass Heat Inserts
1ea 4.8-5.1mm (3/16") Thick x 49-51mm (2") Wide Steel Flat Bar
10mm (3/8") All Thread
7ea 10mm (3/8") Nuts
AR15 FCG
AR15 Firing Pin
Springs (Assorted)
JB Weld
Glock 19,17,17L or 16" 9mm Barrel

Side Note:
----------------