▄▄▄·▄▄▄ ▄▄▄ .    ▄▄▌ ▐ ▄▄▄▄ .     ▄▄·          ▄▄▌     ▄· ▄▄▄▄ ▄▄▄▄▄      
     ▐█ ▀█▀▄ █▀▄.▀·    ██· █▌▐▀▄.▀·    ▐█ ▌▪    ▪    ██•    ▐█▪██▀▄.▀•██        
     ▄█▀▀█▐▀▀▄▐▀▀▪▄    ██▪▐█▐▐▐▀▀▪▄    ██ ▄▄▄█▀▄ ▄█▀▄██▪    ▐█▌▐█▐▀▀▪▄▐█.▪      
     ▐█ ▪▐▐█•█▐█▄▄▌    ▐█▌██▐█▐█▄▄▌    ▐███▐█▌.▐▐█▌.▐▐█▌▐▌   ▐█▀·▐█▄▄▌▐█▌·      
      ▀  ▀.▀  ▀▀▀▀      ▀▀▀▀ ▀▪▀▀▀     ·▀▀▀ ▀█▄▀▪▀█▄▀.▀▀▀     ▀ • ▀▀▀ ▀▀▀       
                                   ██████╗                                      
                                   ╚════██╗                                     
                                     ▄███╔╝                                     
                                     ▀▀══╝                                      
                                     ██╗                                        
                                     ╚═╝                                        
                                                                                
                                                                                
                       -*- Are We Cool Yet? Presents -*-                        
                                                                                
╔══════════════════════════════════════════════════════════════════════════════╗
║                                                                              ║
║                          DB Firearms GnaverBlaster                           ║
║                                                                              ║
║                                ORIGIN: DANISH                                ║
║                         TRANSLATION: Rodent Blaster                          ║
║                          PURPOSE: Blasting Rodents                           ║
║                                                                              ║
║                          A 10/22 Monolithic Pistol                           ║
║                                                                              ║
║                            Release Version 1.0.0                             ║
║                                                                              ║
╠══════════════════════════════════════════════════════════════════════════════╣
║                               /X> Credits <X\                                ║
╠══════════════════════════════════════════════════════════════════════════════╣
║                                                                              ║
║                          [-+ BROUGHT TO YOU BY +-]                           ║
║                                                                              ║
║                    ︻╦╤─ DanishBulldog (DB FIREARMS) ─╤╦︻                    ║
║                                                                              ║
║            [-+ SPECIAL TESTING AND TROUBLESHOOTING CREDITS TO +-]            ║
║                                                                              ║
║      300_Blackout(thanks for the comp and extractor jigs!), aerowolf1,       ║
║   Atticus, dogenado, energylegs, Jak, Jeevus, Justinhates, OA, Pokedaboss,   ║
║    querent, shoe3, sniper69, tdkin3d, tguinan86, Trophy Trout, zer0fux,      ║
║                                     and                                      ║
║                                                                              ║
║                         [-+ Additional thanks to +-]                         ║
║                                                                              ║
║             Capekoviroboti for the beautiful release trailer and             ║
║                                                                              ║
║                       the entire Are We Cool Yet? team                       ║
║                                                                              ║
╠══════════════════════════════════════════════════════════════════════════════╣
║                                                                              ║
╠══════════════════════════════════════════════════════════════════════════════╣
║                         /X> Required Ruger Parts <X\                         ║
╠══════════════════════════════════════════════════════════════════════════════╣
║                                                                              ║
║   10/22 Assembled Bolt                                                       ║
║   10/22 Charging Handle Assembly                                             ║
║   10/22 Receiver Cross Pins + Bolt Buffer Pin (Included in DB HW KIT)        ║
║   10/22 Trigger Pack                                                         ║
║   Ruger BX Magazines are preferred (25rd, 15rd, 10rd rotary)                 ║
║                                                                              ║
║                                                                              ║
╠══════════════════════════════════════════════════════════════════════════════╣
║                 /X> Required Hardware & Other Components <X\                 ║
╠══════════════════════════════════════════════════════════════════════════════╣
║                                                                              ║
║   Exactly 2" OR 4" of pre chambered barrel liner (included in DB HW KIT)     ║
║   4x 1/2" long #6 sheet metal screws                                         ║
║   2x 3mm x 10mm pins                                                         ║
║   JB Weld Classic Epoxy and Super Glue                                       ║
║   Acetone or Rubbing Alcohol for degreasing                                  ║
║   PTFE dry lube spray                                                        ║
║                                                                              ║
║   HARDWARE KITS AVAILABLE AT https://db-firearms.com                         ║
║                                                                              ║
╠══════════════════════════════════════════════════════════════════════════════╣
║                     /X> Print Settings & Orientation <X\                     ║
╠══════════════════════════════════════════════════════════════════════════════╣
║                                                                              ║
║   BEFORE STARTING: Calibrate your printer and prepare it to print at .2mm    ║
║   layer height and .4mm nozzle. This design does not function as well if     ║
║   printing with a wider nozzle due to the close dimensions. If you are       ║
║   over-extruding, your GnaverBlaster will not function as well as you'd      ║
║   like.                                                                      ║
║                                                                              ║
║   1. Main Receiver                                                           ║
║   When printing the main receiver, your first step is to determine which     ║
║   one to print. This will depend on your barrel liner selection. the         ║
║   Redmans liner is .315 and is smaller. .305 liner can also use the          ║
║   redmans file. The Chaszel liner file is .370".                             ║
║                                                                              ║
║   Once you've found your file, load it up on the printer. It should be       ║
║   printed upside down. IF you are printing at .2mm layer height with a       ║
║   .4mm nozzle, you can use the file with built in supports. If not, you      ║
║   should use supports to print - otherwise bridging will be ugly on the      ║
║   ejection port.                                                             ║
║                                                                              ║
║   2. Grip Panels, rails/sights                                               ║
║   Print these flat on your build plate at 100% infill.                       ║
║                                                                              ║
║   3. Print Settings                                                          ║
║   These files do great in PLA+. However, they've also been tested in GF/CF   ║
║   Nylon and ABS. All materials performed well. Print hotter to ensure        ║
║   proper layer adhesion.                                                     ║
║                                                                              ║
║                                                                              ║
╠══════════════════════════════════════════════════════════════════════════════╣
║                               /X> Assembly <X\                               ║
╠══════════════════════════════════════════════════════════════════════════════╣
║                                                                              ║
║   Step 1: Test your bolt operation by installing the bolt with the           ║
║   charging handle assembly, installing your bolt buffer pin, and operating   ║
║   it slowly. If you have binding at this stage, you will need to treat the   ║
║   inside of your receiver with PTFE dry lube spray. Then operate bolt        ║
║   until it frees up.                                                         ║
║                                                                              ║
║   Step 2: Install your trigger pack by first cocking the hammer, then        ║
║   sliding the back in first. Then, push it towards the bolt until it slots   ║
║   into place. Install trigger pins and check operation. Bolt should still    ║
║   operate without issue and move freely. If it does not, check tolerances    ║
║   and try operating bolt 100 times to see if it loosens up.                  ║
║                                                                              ║
║   Step 3: Test fit barrel liner, it should install and remove without        ║
║   serious issue. If it does not, you can drill/file the barrel hole. Cut     ║
║   your extractor groove. There is a jig to help with this in the files.      ║
║                                                                              ║
║   WARNING: When cutting extractor groove, do not penetrate the inside wall   ║
║   of your liner. You should have an angled cut in the liner about 3mm wide   ║
║   that tapers evenly. If you penetrate the inside wall of your liner you     ║
║   can expect your gun to not function.                                       ║
║                                                                              ║
║   Step 4: Sand and degrease your liner, apply JB Weld, and install in        ║
║   barrel. Use a blank or expended shell to set proper barrel headspace       ║
║   with bolt. Press liner against bolt so there is no gap. Ensure your        ║
║   extractor groove matches your bolt extractor. Then, allow to cure for 24   ║
║   hours.                                                                     ║
║                                                                              ║
║   Step 5: Install grip panels, rails, sights, etc. Use the self tapping      ║
║   screws to secure them. You can also use super glue for the sight along     ║
║   with the 10mm pins.                                                        ║
║   You're ready to rock!                                                      ║
║                                                                              ║
╠══════════════════════════════════════════════════════════════════════════════╣
║                       /X> DO YOU STILL NEED HELP? <X\                        ║
╠══════════════════════════════════════════════════════════════════════════════╣
║                                                                              ║
║                   feel free to reach out on social media                     ║
║                           Twitter: @ArthurClaudeen                           ║
║                         Instagram: @db_firearms_USA                          ║
║                                                                              ║
║                        Or, join us on Matrix to chat:                        ║
║               https://matrix.to/#/#AWCYwaitingroom:matrix.org                ║
║                                                                              ║
╠══════════════════════════════════════════════════════════════════════════════╣
║                          /X> DID YOU MAKE IT?  <X\                           ║
╠══════════════════════════════════════════════════════════════════════════════╣
║                                                                              ║
║      We would love to see photos of your build. Tag us on social media!      ║
║                                                                              ║
╠══════════════════════════════════════════════════════════════════════════════╣
║                                                                              ║
║                 -`-,-{@  AWCY? - Stronger Together  @}-,-`-                  ║
║                          (oven appreciation group)                           ║
║                   Join us at: https://www.AreWeCoolYet.WTF                   ║
║                                                                              ║
╚══════════════════════════════════════════════════════════════════════════════╝