███╗   ███╗███████╗ ██████╗  █████╗ ██████╗ ██╗███████╗████████╗ ██████╗ ██╗          ██╗███████╗
████╗ ████║██╔════╝██╔════╝ ██╔══██╗██╔══██╗██║██╔════╝╚══██╔══╝██╔═══██╗██║         ███║╚════██║
██╔████╔██║█████╗  ██║  ███╗███████║██████╔╝██║███████╗   ██║   ██║   ██║██║         ╚██║    ██╔╝
██║╚██╔╝██║██╔══╝  ██║   ██║██╔══██║██╔═══╝ ██║╚════██║   ██║   ██║   ██║██║          ██║   ██╔╝ 
██║ ╚═╝ ██║███████╗╚██████╔╝██║  ██║██║     ██║███████║   ██║   ╚██████╔╝███████╗     ██║   ██║  
╚═╝     ╚═╝╚══════╝ ╚═════╝ ╚═╝  ╚═╝╚═╝     ╚═╝╚══════╝   ╚═╝    ╚═════╝ ╚══════╝     ╚═╝   ╚═╝  


1Plus2Equals3D
& head tester/codeveloper Sloth2aDesigns


* Thanks to
	* Developers of FMDA DD17.2 for the well tuned pistol base model, and rail design
	* Developers of PY2A for the well tuned pistol base model, and rail design 
	* DigitalNimbus for the 10mm implementation that is packaged within
	* My beta testers
	* Guncad-dev Twitter for keeping me motivated. Stop fighting yall. 
                                                                                                 
Files:

The primary release and most tested models are the AR charging DD17.2 based releases. Everything else is considered a 
WIP addon. Some are very mature, others will require minor clearancing.

______________________________________________________________________________________________________________________

I print with Polymaker Polymax PLA. I've printed this on a Ender 5. It is tight on the build plate, but it works.
100%/99% infill everywhere. 15 on wall count, and 0.16 layer height has been my goto. 


______________________________________________________________________________________________________________________
*^*General Parts*^*

The back cap upper rear take down holes are now printed at 3mm to enforce strong printability. Please drill a 6mm hole after printing. 

See BOM

______________________________________________________________________________________________________________________

*^*Print Orientation*^*


++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++


Don't blow your hands off. Lefties watch your thumbs. They don't have stress analysis in the trap house. 



--1Plus2Equals3D

P.S.
  █████████  ██████████ █████       █████            █████████  ███████████     █████████     █████████  █████   ████
 ███░░░░░███░░███░░░░░█░░███       ░░███            ███░░░░░███░░███░░░░░███   ███░░░░░███   ███░░░░░███░░███   ███░ 
░███    ░░░  ░███  █ ░  ░███        ░███           ███     ░░░  ░███    ░███  ░███    ░███  ███     ░░░  ░███  ███   
░░█████████  ░██████    ░███        ░███          ░███          ░██████████   ░███████████ ░███          ░███████    
 ░░░░░░░░███ ░███░░█    ░███        ░███          ░███          ░███░░░░░███  ░███░░░░░███ ░███          ░███░░███   
 ███    ░███ ░███ ░   █ ░███      █ ░███      █   ░░███     ███ ░███    ░███  ░███    ░███ ░░███     ███ ░███ ░░███  
░░█████████  ██████████ ███████████ ███████████    ░░█████████  █████   █████ █████   █████ ░░█████████  █████ ░░████
 ░░░░░░░░░  ░░░░░░░░░░ ░░░░░░░░░░░ ░░░░░░░░░░░      ░░░░░░░░░  ░░░░░   ░░░░░ ░░░░░   ░░░░░   ░░░░░░░░░  ░░░░░   ░░░░