POLYMER80 SOCOMMISH19
USES POLYMER80 G19 RAILS.
_-_-_-_--_--_--_--_--_--_

This is the Socommish19, meant to look similar to the MK23 Socom, Front end has a little extra weight added with all the filament.
Therefore, you need much less effort to maintain control during recoil, muzzle rise, and stay on target. Pew Pew Pew...
Comes with a Matching Magholster. You can purchase a quick clip and 1/8inch Chicago Screws to finish the magazine holster.
Uses Polymer80 G19 rails.



Print Settings
==============
Esun or Inland Brand PLA PLUS+++ preferred
Nozzle 220
Bed 62
Treesupports all over with 15 percent infill


-------------------------------------------------------
Mag Holster

you can find the quick clip and 1/8 inch chicago screws to finish the magholster at holsterbuilder.com