# Ruger Wrangler Mods
by Booligan

A Collection of Mods for Ruger Wrangler Revolvers


## Description
This collection of mods for the Ruger Wrangler can add a variety of looks to your revolver. Whether it's a simple, futuristic design or something straight out of the Vin Diesel movie XXX, you'll find a kit for you. Included are Step files for customization, especially of the grip panels using SVG files. 

## WARNING!
The designer, and any affiliated or non-affiliated groups, cannot be held responsible or liable for any injuries or damages that occur with your use of this model. This model is tested with low recoiling firearms, use with calibers greater than 9mm is not recommended. 

It is imperative you read this entire document before beginning this project.

## Instructions
1. Print each kit muzzle down on the bed. Standard or Tree supports will work, depending on what you prefer. Adhesive on a glass bed will strongly help with print success. Settings should be 6+ walls and 40%+ infill. It doesn't really need to be 100% solid, just have a lot of walls. 
2. Remove ejector housing by unscrewing it from the barrel. 
3. Slide desired kit onto revolver and secure with the ejector housing screw. 

## Printing Tips
* Duramic/eSUN PLA+ is the _recommended_ filament
* Print HOT and SLOW for maximum bonding and strength. (50 mm/s and 230 C is recommended.) 
* It is strongly recommended that your x-axis, y-axis, and z-axis stepper motors are calibrated 100%. Use your printer's magic # for layer height (Don't know what it is, YouTube time...)

## Changelog

* Public Release
> - Initial release


## License
> MIT License