# AR-15 Lower Reciever

#### Cjwelcome

#### Version 1.0

#### Description

A 3D print optimized AR-Lower which will accept Mil-Spec parts/accessories.

#### Parts to print:

		 - Lower Receiver

#### Print Settings:

		 Recommended Filament: PLA+
		 
		 - Nozzle Temp             - 215C +- 5C
		 - Bed Temp                - 65C +- 5C
                 - Infill                  - 100%
		 - Brim                    - 10+ Lines
		 - Supports                - Yes 60 Degree printable incline furthur instructions in PDF
		 - Layer Height            - 0.25mm innitial layer, 0.2mm all layers
		 - Prep                    - Print on heated bed with PEI sheet.